Home > Split Solar Water Heater > Single Coil Split Solar System

U.S.A Style Split Pressurized Solar Water Heater (200L)


Split pressurized solar water heater (Single Coiler)
Model: FD-SP-200L
 
Split pressurized solar water heater features
1. The upright tank can make the water temperature to a high level. It can hot the water instantly.
2. The tank inside the building, the hot water loses less energy than the normal one .
3. The pressurized solar water heater collector and the split solar water heater tank is separated, that makes the system combine with the building perfectly, which will reduce the sightseeing for the building and environment around .
4. Back up with electric heater so that in the day without sunshine hot water can also be used.
5. Can be combined with gas or electric heater
6. Max. Pressure: 12bar; Operating Pressure: 6 bar
7. It can be used for other function, such as warming
 
Split presssurized solar water heater working principle
1. The collector absorbs solar energy and transmits it to the water tank through circulation .
2. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically.
3. The circulation pump makes heat-conducting liquid circulate automatically.
4. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank.
5. When the temperature difference between solar collector and tank doesn't reach the set value, the circulation pump will be shut automatically .
6. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically.
 
Split pressurized solar water heater pump station component
1. Operating screen
2. Manometer
3. Pump speed adjust switches
4. Temperature difference circulation pump
5. Flow rate indicator
6. Return circuit connector
7. Safety valve
8. Expansion vessel connector9. Return circuit connector
10. Wall mounting
11. Expansion vessel: 8L
12. Pressure resistance: 10 bar pressure for expansion vessel
 
Separate pressurized solar water heater specification
Descripition
Split pressurized solar water heating system
Material of out manifold
0.55mm thickness color steel/ fluorine carbon steel
Material of inner tank
Food grade 1.5mm thickness SUS304 stainless steel
Tank insulating layer
50mm 45kg/m³ high-density polyurethane foamed
Inlet and outlet hole
Male G3/4
Max pressure
0.6 Mpa
Solar collector tube
3.3 Borosilicate glass with N/Al coating
Thickness of glass tube
1.6mm
Vacuum tube tightness
P≤0.005 Pa
Absorption
as=0.93-0.96 (AM1.5)
Emission ratio
εh=0.04-0.06 (80C±5C)
Idle sunning property parameters
Y=220~260m2.C/KW
Average heat loss coefficient
ULT=0.6~0.7W/(m2.C)
Bracket:
2.0mm thickness aluminum alloy
Welding:
Argon arc welding
Fastening pieces:
Made of stainless steel screw
Tank capacity
200L
Solar collector
1pcs 58x1800x20tube solar collector
Absorber area
1.875m²
Working station
SP116 pump station
Heat exchanger length
18m

 

Heat pipe technical data

Item

Measured value

Heat conduction coefficient

>99%

Axial heat transition auantity

0.93-2.49kw/cm²

Heat conduction speed

>200mm/s

Axial temperature difference

1-2centi-degree/m

Starting temperature

20centi-degree

Starting speed

2min

Working temperature range

30centi-degree~300centi-degree

Resistance to high temperature

No deformation in 48hours under 250C high temp condition

Resistance to low temperature

-35C

Life

>10years

2.jpg

 

 

C.jpgD.jpgE.jpg

Contact Us

Message should contain 20-3000 characters.3000 Characters Remaining.



Related Products