Home > Solar Collector > Heat Pipe Solar Collector

18Tube Vacuum Tube Solar Collector


18tube vacuum tube solar collectors details

Model:FD-SC-18

 

Vacuum tube solar collector working principle:

1. The heat pipe series solar collector are always connected with existing heating supply device.

2. The selective coating on the inner Cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminium fins.

3. The liquid in the heat pipe changes into vapour which rises to the condenser.

4. The heat then passes through the heat exchanger and the vapour becomes liquid, returning to the base of the heat pipe.

5. The heat conducts to the heat transfer liquid (anti-freezing liquid or water) via a copper pipe.

6. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.

 

Vacuum tube solar collectors specification
1. Manifold (interior): 0.8mm thickness Red copper 
2. Manifold (exterior): 2.0mm thickness Aluminum alloy 
3. Glass tube dimensions: 58mm x 1.800mm 
4. Insulation layer: 45mm thickness glass firber /polyurethane layer 
5. Heat preservation: 72-96hrs 
6. Hail resistance: 25mm 
7. Max pressure: 6 bar 
8. Coating of vacuum tube: Ss-c/cu 
9. Frame: 2.0mm thickness Aluminum Alloy 

Vacuum tube solar collectors applications
1. Hotels, resorts, hospitals and hostels 
2. Process industry, boiler feed, laundry and canteens 
3. Agricultural sector, hatcheries and dairies 
4. Process industry, Boiler feed, Laundry and canteens 
5. Agricultural sector, hatcheries, and dairies 
6. Swimming pool heating 
7. In-process heating 
8. Health clubs (Steam / Sauna)

 

Technical data of vacuum tube solar collector

 Descripition
 Vacuum tube solar collectors

 Numbers of tube(pcs)

 18

 Aperture area approx.(m2)

 1.664

 Gross area (m2)

2.915

 Fluid volume(L)

 0.9

 Maximum operation pressure(Bar)

 6

 Test pressure(Bar)

 9

 Heat transfer fluid

 Anti-freeze Fluid (Water-Glycol)

 Max.working temp
 250C

 hot water(L/Day)

 180

 ��T

 35C (Radiation>=800w/m2.day)             

 Collector efficiency

 76.4%

 Medium

 Pure water

 Start-up Temperature of heat pipe

 <=30C

 Warranty

 5years

 

Vacuum tube solar collectors material specification

 Flow type

 Heat pipe

 Heat pipe material

 0.6mm thickness TU1 copper

 Heat pipe size

 Top: Ø14* 1mm; Body: Ø8* 0.6mm 

 Tube diameter

 58x1800mm

 Solar vaccum glass tube

 High boron-silicon

 Coating of absorber on glass tube

 Al-N-Al,Copper,Stainless steel

 fins around heat pipe

 single long Aluminum(1.68m)

 Manifold pipe material

 TP2 copper (Ø35x0.8mm

 Manifold casing material

 Aluminum alloy(2.0mm)

 Insulation material in manifold casing

 Rock wool

 Thickness of insulation(mm)

 45

 Density of insulation (kg/m3)

 90

 Frame material

 Aluminum alloy frame (2.0mm)

 Sealing Materials

 EPDM

 

Heat pipe technical data

 Item

 Measured value

 Heat conduction coefficient

 >99%

 Axial heat transition auantity

 0.93-2.49kw/cm²

 Heat conduction speed

 >200mm/s

 Axial temperature difference

 1-2centi-degree/m

 Starting speed

 2min

 Starting temperature

 20centi-degree

 Working temperature range

 -30centi-degree~300centi-degree

 Resistance to high temperature

 No deformation in 48hours under 250C high temp condition 

 Resistance to low temperature

 -35C

 Life

 >10years

 Condenser size
 Dia 14mm,Dia 14mm/24mm, thickness 0.5mm,0.6mm,0.7mm

Contact Us

Message should contain 20-3000 characters.3000 Characters Remaining.



Related Products