Home > Split Solar Water Heater > Single Coil Split Solar System

150Liter Split Solar Water Heater

点击查看详细信息...


150Liter split solar water heater
Model: FD-SP-150L
 
Split solar water heater features
1. The upright tank can make the water temperature to a high level. It can hot the water instantly. 
2. The tank inside the building, the hot water loses less energy than the normal one 
3. The pressurized solar water heater collector and the water tank is separated, that makes the system combine with the building perfectly, which will reduce the sightseeing for the building and environment around 
4. Back up with electric heater so that in the day without sunshine hot water can also be used
5. Can be combined with gas or electric heater 
6. Max. Pressure: 12bar; Operating Pressure: 6 bar
7. It can be used for other function, such as warming
 
Split solar water heater working principle
1. The collector absorbs solar energy and transmits it to the water tank through circulation 
2. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically
3. The circulation pump makes heat-conducting liquid circulate automatically
4. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank. 
5. When the temperature difference between solar collector and tank doesn't reach the set value, the circulation pump will be shut automatically 
6. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically
 
 
 
Split solar water heater working station component:
1. Operating screen 
2. Manometer 
3. Pump speed adjust switches 
4. Temperature difference circulation pump 
5. Flow rate indicator 
6. Return circuit connector 
7. Safety valve 
8. Expansion vessel connector9. Return circuit connector 
10. Wall mounting 
11. Expansion vessel: 5L, 8L, 12L, 19L, 20L, 24L 
12. Pressure resistance: 10 bar pressure for expansion vessel
 
Split solar water heater specification
 Descripition
 Split solar water heater
 Material of out manifold
 0.55mm thickness color steel / fluorine carbon steel
 Material of inner tank
 Food grade 1.2-2.0 mm thickness SUS304 stainless steel
 Tank insulating layer
 40mm 45kg/m³ high-density polyurethane foamed
 Inlet and outlet hole
 Male G3/4
 Max pressure
 0.6 Mpa
 Solar collector tube
 3.3 Borosilicate glass with N/Al coating
 Thickness of glass tube
 1.6mm
 Vacuum tube tightness
 P<=0.005 Pa
 Absorption
 as=0.93-0.96(AM1.5)
 Emission ratio
 0.04-0.06(80C+-5C)
 Idle sunning property parameters
 Y=220~260m2.C/KW
 Average heat loss coefficient
 ULT=0.6~0.7W/(m2.C)
 Bracket:
 2.0mm thickness aluminum alloy
 Welding:
 Argon arc welding
 Fastening pieces:
 Made of stainless steel screw
 Tank capacity
 150L
 Solar collector
 1pcs 58x1800x20tube solar collector
 Absorber area
 1.875m²
 Working station
 SP106,SP116,SR962 working station
 Heat exchanger length
 15m
 
Benefits of this kind stainless steel solar water heaters:
1. Prolong the life of your existing water heater

2.Costs less than an electric, gas or oil water heater

3.No maintenance required

4.Lasts longer than a traditional hot water heater

5.Reduce your water heating costs

6.Reduce your carbon footprint

 

Heat pipe technical data

 Item

 Measured value

 Heat conduction coefficient

 >99%

 Axial heat transition auantity

 0.93-2.49kw/cm²

 Heat conduction speed

 >200mm/s

 Axial temperature difference

 1-2centi-degree/m

 Starting speed

 2min

 Starting temperature

 20centi-degree

 Working temperature range

 -30centi-degree~300centi-degree

 Resistance to high temperature

 No deformation in 48hours under 250C high temp condition

 Resistance to low temperature

 -35C

 Life

 >10years
 Condenser size
 Dia 14mm,Dia 24mm, thickness 0.5mm,0.6mm,0.7mm


Contact Us

Change email address
Message should contain 20-3000 characters.3000 Characters Remaining.


Related Products