Home > Compact Solar System > Heat Pipe Pressurized System

High Quality Fadi Compact Pressurized Solar Water Heater (250Liter)


Pressurized Solar Water Heater Details: 
Model: FD-IP-30

 

Compact pressurized solar water heater features:

1.Adopts the best conduction performance metal- heat pipe (copper) 
2.Can be used all year round in the cold climate
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa 
5.No water in the tube, one tube broken don't influence the system working 
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage
7.Dual-purpose brackets for both flat and inclined roof

8.The system is pressurized,it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out

 

Pressurized solar water heater working principle:

1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.

2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot

3.No water in the heat pipe makes the whole system could bear pressure

 

 

 

 

Description

Compact pressurized solar water heater

Material of out tank

0.4mm thickness color steel/ fluorine carbon steel

Material of inner tank

Food grade 1.5 mm thickness SUS304 stainless steel

Tank insulating layer

55mm thickness, 45kg/m³ high-density polyurethane foamed

Inlet and outlet hole

Male G 1/2, 3/4

Max pressure

0.6Mpa

Solar collector tube

3.3 Borosilicate glass with N/Al coating

Thickness of glass tube

1.6mm

Vacuum tube tightness

P≤0.005 Pa

Absorption

as=0.93-0.96(AM1.5)

Emission ratio

εh=0.04-0.06(80C±5C)

Idle sunning property parameters               

Y=220~260m2.C/KW

Average heat loss coefficient

ULT=0.6~0.7W/(m2.C)

Bracket

1.5mm thickness of galvanized steel material

Structure of tank:

5 holes for air vent,water inlet and outlet,electric heater,Mag Rod      

Welding:

Argon arc welding

Fastening pieces:

Made of stainless steel screw

Absorber area

2.811m²

Heat pipe size

Dia14mm x 90mm length condenser,170cm length in total

Heat pipe material 

 TU1 copper 

Heat pipe power 

 >120W/pcs

Temperature tolerance 

 from  -35C  to 250C

Tube quantity

30tube   58x1,800mm with heat pipe

Tank capacity

250L

 

 

 

 

 

Contact Us

Message should contain 20-3000 characters.3000 Characters Remaining.



Related Products